Window AC BTU Calculator: What Size AC Do You Need?

To size a window AC, measure the room, multiply length by width, and match the square footage to the ENERGY STAR chart: about 5,000 BTU for up to 150 sq ft, 6,000 BTU for 150 to 250 sq ft, 8,000 BTU for 300 to 350 sq ft and 12,000 BTU for 450 to 550 sq ft. Then adjust for sun, people and kitchens. The calculator below does all of that for you, in feet or meters.

Window AC BTU Calculator

Based on the ENERGY STAR room air conditioner sizing chart and its adjustments. Very high ceilings, top-floor units under a hot roof and poor insulation can need more. A unit that is too big cools fast but leaves the room damp, so do not just buy the largest one.

ENERGY STAR sizing chart

Room size (sq ft)Room size (m²)Capacity needed (BTU/h)
100 to 1509 to 145,000
150 to 25014 to 236,000
250 to 30023 to 287,000
300 to 35028 to 338,000
350 to 40033 to 379,000
400 to 45037 to 4210,000
450 to 55042 to 5112,000
550 to 70051 to 6514,000
700 to 1,00065 to 9318,000

Adjustments the calculator applies

  • Heavily shaded room: reduce capacity by 10%.
  • Very sunny room: increase capacity by 10%.
  • More than two people regularly in the room: add 600 BTU for each extra person.
  • Kitchen: add 4,000 BTU.

Worked example: a 14 × 12 ft bedroom

14 × 12 = 168 sq ft, which falls in the 150 to 250 sq ft band, so the starting point is 6,000 BTU. With normal sun and two people there is no adjustment, so a 6,000 BTU window unit is the right size. If that same room got strong afternoon sun, 10% more gives 6,600 BTU, and an 8,000 BTU unit is the closest common size above it.

Portable AC? Read the SACC number

Portable ACs list two ratings. The large ASHRAE number is measured under lab conditions; the DOE SACC (Seasonally Adjusted Cooling Capacity) is lower and closer to real use. Match the calculator result to the SACC rating. Dual-hose models cool better because they do not pull hot outside air back into the room.

Renter checklist for window ACs

  • Get landlord permission in writing. Some buildings ban window units or require a support bracket.
  • Use a no-drill support bracket or a unit rated to sit on the sill without one, and secure the window so it cannot be pushed open from outside.
  • Check your window type: hung windows suit standard units and saddle units; sliders and casements need a portable or a special model.
  • Seal side gaps with the included foam panels, and plug straight into the wall, never into an extension cord.
  • Want heating too? A window heat pump heats and cools from the same window and is easy to remove at move-out.

FAQ

What size AC do I need for a 12 × 12 room?

A 12 × 12 room is 144 sq ft, so ENERGY STAR suggests about 5,000 BTU. Go to 6,000 BTU if the room is very sunny or used by more than two people.

Is a bigger air conditioner better?

No. An oversized unit cools the air before it removes the humidity, so the room feels cold and clammy, and the unit cycles on and off more, which wastes energy.

How many BTU do I need per square foot?

About 20 to 35 BTU per sq ft for typical apartment rooms, but the chart is more accurate than a single number because small rooms need more per square foot than large ones.

How do I size a portable AC?

Use the same room size result, but compare it with the DOE SACC rating on the box, not the larger ASHRAE rating. A dual-hose portable gets closer to its rated cooling than a single-hose one.

Do high ceilings change the size I need?

Yes. The chart assumes standard 8 ft ceilings. For higher ceilings, top-floor apartments under a hot roof or rooms with a lot of glass, choose the next size up.

Source: ENERGY STAR room air conditioner sizing chart and adjustments. Results are estimates; check the unit’s manual and your building rules.